返回列表 发帖

找一个理由爱上昆明

诗人:春城阿海

我知道你现在还在昆明,

只是你悄悄退出了我的QQ群,

也许是我自作多情,

也许是因为你爱上了别人,

昆明站分手的那个吻,

比雪花擦落还要冷,

你的眼中藏着别人,

我的泪只有自导自演。

找一个理由爱上昆明,

那就是我真的爱上了你的唇。

找一个理由爱上昆明,

我忘不了那份曾经的爱情。

找一个理由爱上昆明,

直到现在我都没有爱上别人。

找一个理由爱上昆明,

为了你我爱上了你所在的城。
气候宜人吧。。。
没去过昆明。不过想去看看
挂印封金,扬长而去……
我更喜欢西双版纳
偶也认为昆明没有丽江好更宜居
昆明真是四季如春
昆明
没有漓江好
一直很向往的,听说很适合养老
其实那里很美有,一直想去看看,只是暂时没有机会

and effect the visibility

Coating is the critical step among marking construction, sealcoating equipment and please pay more stict attention to its operation procedures.
Coating procedures and precautions:
1) Check pavement marking equipment and inspect the construction equipment carefully and assure that they are in good condition. Please do pre-marking, and check pavement striping machines the color, thickness, width, volume and glass beads spread volume. if necessary, adjust the parameters and asphalt striping machine.
2) Coating should be start after the primer drying thoroughly. Or, the solvent will penetrate the unhardened paint film, resulting in solvent bubbles, field striping machine and marking contamination.
3) To ensure the visibility of markings at night, please spread glass beads when coating construction. It is demonstrated that half of the diameter of field marking equipment glass beads embedded in coating that the reflect effect is the best. But we should know that the glass bead will be buried in the coating if line marking equipment the paint temperature is high, while the glass beads spreading speed is fast ,and the glass beads can not adhered to coating firmly and is easy to come off if the paint temperature is low, while line markers glass beads spreading speed is slow, for at that time the coating is almost solidified, which will affect the whole reflect effect. Glass beads should be spreaded uniformly, generally speaking, 0.3~0.5kg on square meter is proper. If line striping equipment the glass bead is too excessive, it will make the markings' color bad and cause uneven visual effect, and is easy for dust to stick on it and effect the visibility.
返回列表